Licenses

New Irish Kisses Tutorial





To do this tutorial you will need  
Evol Angels Kissably Irish
Which you can buy HERE
The tube im using is from Kejenna you can buy it HERE
You will also need eye candy gradient glow you can download this from the net

Open a new layer 650 x 650
Open the kit and copy and paste the splatter make it smaller enough to fit into the top left corner
 of the tag duplicate and mirror now merge these two layers together
Duplicate again and this time flip now merge these two layers together
now you have you background
Open the sun and place in center of the tag make bigger the same size as the tag
place infront of splatters just placed
Now open the circular frme from within the scrapkit place in center of the tag
Open a paper from the kit place behind the frame click inside the frame expand by 2
then invert and on the paper layer click delete
Now choose a tube of choice and just as the paper layer place behind the frame click inside frame expand by 2 invert and on tube layer click delete
Now duplicate the tube layer on the bottom layer gaussian blur 10 and on the top layer change the opacity to screen merge these two layers together
 Now back to the frame layer add a drop shadow of choice to that
Merge the paper layer the tube layer and the frame layer make smaller
 and place in top left of the tag
Open a bow from the scrapkit place on the frame top left
adding a drop shadow of choice merge this with the frame
Open the gold coin and place that to the middle right of the tag behind the frame just placed
Now open the charm and place this to the left middle higher than the coin
 behind the large circle frame placed earlier
Open the bouquet from the kit and place corner top right duplicate flip and mirror
so this should now be facing a different way to the top right one and on the other side of the tag
merge these two layers together
and place behind the circular frame
Open the pot of gold make slightly smaller and place middle right at the bottom
 adding a drop shadow of choice
Now open the rainbow and make smaller and place this
so it is coming out of the pot of gold
you will need to mirror this then place now open the sparkles 2
and flip place these in the rainbow just plaed if any are not in the raindow
 then using the eraser rub them out
merge the rainbow and sparkles togther
open the sparkle 1 and place top left duplicate place bottom left
then merge these two together
Open the coins and place along bottom of the tag
duplicate twice each time moving them further to the right when happy
merge these together making sure that they are behind the pot of gold
Get the beadstring from the scrapkit and place in the center of the clover that is to the top
right adding a drop shadow of choice
Now open the wordart using eyecandy add a gradient glow of 5 to the outside of the writing
 i used black apply add a drop shadow of choice 3 times to this then place this from the center of the clover on the top right of the tag
Open the kiss in the scrpkit ad place any where on the tag duplicate and again place were desired  now merge these two together
Now open your tube of choice adding a drop shadow of choice place were desired
Add your copywrite and name and all done
thankyou for looking and happy psping......;)

Bad 2 The Bone




To do this tutorial you will need  
 Toxic Desirez Scrapkit Bad To The Bone
Which you can buy HERE
The tubes im using are from Toosh Toosh you can buy them HERE
You will also need eye candy gradient glow you can download this from the net

Open a new layer 650 x 650
Open the kit and copy and paste the splatter make it smaller enough to fit into the top left corner
 of the tag duplicate and mirror now merge these two layers together
Duplicate again and this time flip now merge these two layers together
now you have you background
Open candy 2 from the kit make this the same size as you did the splatter
place top right of the tag rotating it so the pads face the corner add a drop shadow of choice
duplicate and mirror now merge these two layers together change the opacity to screen
Hue and saturate to a sky blue colour
Open the line of paws from the kit and place along bottom of the tag
hue and saturate to a green colour now duplicate a few times each time change position
weather it be to flip to mirror to hue and saturate to a different green do this until you cannot see threw then then merge them all together
Now open the kennal and place bottom right of tag open the two paw prints and make really small ...small enough to fit on the label of the kennal
Now open the bad to the bone ,bone make smaller again so this fits between the two roof sections now adding drop shadow of choice to both merge these with the kennal just placed also add a drop shadow of choice to the kennal as well
Get some of the flowers from the scrapkit and place along the green fence made before with the string of paw prints
Open your tube of choice place as desired adding a drop shadow of choice to it as well
I also used the cat and snail from the tube kit i added dropshadow to both
I placed the cat on the kennal roof and the snail to the left of the tag staring up at the dog
Open the ribbon from the kit and place center of the tag adding a drop shadow of choice to it
Open the sparkles place 1 boottom of the tag duplicate and place other top of the tag merge two of these together place behind the cat layer
Open the ball layer add a drop shadow of choice place bottom right just beside the kennal now oen dogs bowl and place that infront of the ball just placed
Get the wordart make smaller and place between the two butterflys on the top placed before making sure that its behind the butterfly layers
add a drop shadow of choice to the wording
Open one of the frames and place along bottom of the tag place this layer just behind the cat layer
add a drop shadow of choice to it
Add your copyright and your name of choice adding a gradient glow
and a drop shadow of choice
All done

Whatever Tutorial



To do this tutorial you will need Toxic Desirez Scrapkit Um Whatever
Which you an buy HERE
The tube im using is Celinart Tube tube you can buy that HERE
You will also need eye candy gradient glow you can download this from the net

Open a new layer 650 x 650
Go into the kit and get the slatter make it smaller
so it fits in top left of the tag duplicate and mirror merge together
 duplicate again and flip now merge these two layers togetheryou now have the base for your tag
Now go in to the kit again and copy the large circle frame
make small again to fit into a corner of the tag only dont place it there
 place it top left of tag duplicate and place this one center right duplicate again and place botom left
now go into the kit and copy and paste 3 papers of choice
pick a circle for each click inside one circle expand by 3
invert and on the paper layer click delete do this for all three circles
now open your tube of choice and make this so its a close up
some tubes come with close ups if not make biggeryou will have to sharpen the image a few times
now place the tube behind the first circle placed do the same as the paper layer
click inside the circle expand by 3 invert and on the tube layer click delete
do this for all three circles only change the position of the tube in each frame
now go to the top left circle duplicate the tube layer
gaussian blur by 10 on the top tube layer change the opacity to hard light
on the same layer effects texture effects weave
 choose a colour from the tube for both windows gaps box ticked apply
add a drop shadow of choice to the frame now merge these four layers together
the paper layer the blurred tube layer the weaved tube layer and the circle frame layer
now to to the center right circle duplicate the tube layer on the bottom layer gaussian blur by 10
on the top tube layer change the opacity to screen
duplicate this layer and change the opacity to overlay on this layer
effects texture blinds width 10 opacity 60 light from top ticked
choose a colour from the tube apply
add a drop shadow of choice to the circle framenow merge these 5 layers together
the paper layer the blurred tube layer the screened tube layer
 the overlay tube layer and finally the circle fame layer
now on the bottom left circle duplicate the tube layer gaussian blur by 10
 on bottom tube on the top tube layer change the opacity to dodge apply
add a drop shadow of choice to the circle frame
 now merge these 4 layers together paper layer blurred tube layer
dodge tube layer and circle frame change around the top and bottom left cricles
now open the wirer and place over top circle copy and paste the ribbon from the kit
 make smaller enough to fit bottom right
duplicate and mirror merge these two layers together
open the bunny add a drop shadow of choice place bottom right corner of the tag
open the thorned hearts place top right of the tag behind the right circle
open one of the lolli layers within the kit
make smaller rotae to a diagonal angle place top right just infront of thorned heart
 just placed add a drop shadow of choice to both these layers
open bow add adrop shadow of choice place center left between the two circle frames
just about were they meet
get the spiked ball make smaller and place a couple behind the three circle frames made before
Open your tube of choice place center of the tag adding a drop shadow of choice
open the skulls and wings make smaller add drop shadow of choice
 place bottom left over the top of the tube just placed
get the corner star place right bottom of tag duplicate and mirror
merge these two layers together place this layer behind the bunny placed before
Get the sparkles from the kit make them the same size as the tag place
top of tag duplicate and place bottom of tag merge these two layers together
place this layer behind the two top circle layers but infront of bottom left circle
open skull1 layer make small enought ot be placed on top of winged skull
 that was place bottom left before
open the lips make eally small and place a couple around the tag
Get the bone border make smaller and place between the bunny on the right
 and the wing and skulls to the left so you can erase any of your tube
 that hanges over the top of this
get the butterfly add drop shadow of choice make smaller place any were on the tag
now if you wish to use any thing from the kit please do
Add your copyright and your name of choice adding a gradient glow
and a drop shadow of choice
All done

Honey Tutorial




To do this tutorial you will need  Toxic Desirez Scrapkit Sweet AzHoney
Which you an buy HERE
I have also used one of Millies Templates 774 which you can download from HERE
The tube im using is Joel Adams tube you can buy that HERE
You will also need eye candy gradient glow you can download this from the net

Open the template and delete the copyright layer
Hide all the layers apart from the last rectangle
Click inside the rectangle expand by 3 flood fill colour of choice select none
Now click again on the rectangle layer contract by 4 layer
then delete you should now have a coloured frame
 choose a paper from the scrapkit copy and paste
click inside the rectangle expand by 2 then invert and on the paper layer click delete
Now make sure the frame is infront of the paper layer add noise of choice and a drop shadow of choice to the frame then merge together
Unhide next layer and do the same as you did with the first layer
 the larger rectangle only change the colour of the flood fill to a different colour from your tube
Unhide the next layer and do the same steps as the last two rectangles
 until you have a circle frame and a paper circle
Now open your tube of choice copy and paste it so it fills the circle totally
click inside frame a then delete on the tube layer
duplicate the tube layer change the lower layer to gaussian blur 10 change the opacity on the top tube layer to screen merge the two tube layers and the paper layer together
Effects texture weave 1.3.1 gaps filled ticked and the two boxes black apply
now add noise of choice to the frame created before and a drop shadow of choice to it now merge these two layers together
Un hide the next layer and do the same as you have done
to all the other layers until you have a frame and paper layer
Now open your tube of choice copy and paste behind frame
 click inside frame invert and on the tube layer
 click delete now duplicate the tube layer on the bottom layer gaussian blur by 10
on the top layer change the opacity to overlay
 now merge these three layers together paper layer and two tube layers
add a noise and drop shadow of choice to the frame them merge this with the paper layer
Do the same as all the rest untill you have a frame
instead of opening a paper click inside frame create new raster layer and flood fill it black
Now open your tube of choice again
With your selections tool on circle choose a section of the tube then invert delete
 Now duplicate this layer and move around to create a mural with your tube when all filled merge together and place behind the frame just created
click on black circle invert and on the mural tube layer click delete
Now merge the tube layer and black circle together
Duplicate this layer and on the bottom layer gaussian blur by ten
On the top layrer change the opacity to Lumiance Legacy
now merge these two layers together
add a noise and drop shadow of choice to the frame and merge that with the the tube mural layer
Unhide the small layer and do the same as you have done with all the other layers
Click inside the frame new raster layer and choose a colour from your tube flood fill this layer
copy and paste your tube into the frame
Now click on the frame layer invert and on the tube layer click delete
merge the back and tube layer together
Hue and saturate to a colour of your choice
Now on the frame layer add noise and drop shadow of choice merge this with the layer just created
Open the splatter from the kit and make small enought to fit into top left of the tag
 duplicate and mirror merge these two layers together
duplicate and flip merge these two layers together this is now the background
 for your tag place at the back of the tag
Open the honey from the kit and make small to fit into bottom right of the tag
add noise of choice to this duplicate and place top left of the tag merge these two layers together and placebehind the first layer of the template
Move the first rectangle from the template more to the left of the tag
Opeen the flowers from the kit make slightly smaller and place bottom left of the tag
adding a drop shadow of choice to it
Open the honey bear from the kit make smaller add drop shadow of choice
 and place this bottom left of the tag infront of flowers just placed
Open lemon and place top right of the tag place this layer
just behind the first circle from the template
Open the tree from the kit make slighly smaller and place to the left of the tag
 between the first circle layer and the lemon layer
Open the pitcher and glass make smaller and place both bottom right of the tag
adding  drop shadow of choice if needed next  open the sparkles from the kit
and place top of tag duplicate and place bottom of tag
 merge these two layers together
Open the flower ribbon add a drop shadow of choice and rotate it until horizontal
 place along the bottom of the tag place this layer behind the flower layer
Move the little square layer further up towards the top right corner
Open the words and place top left corner move the layer so its behind the second circle layer and access that comes out the bottom use the eraser
Paste the words again only place the bottom of the words in the bottom right corner of the tag if any are seen from the left erase place this in same place as words placed before
merge these two layers togther
Open up your tube of choice add a drop shadow of choice and place were desired
Add your copyright and your name of choice adding a gradient glow
and a drop shadow of choice
All done

Synful Treatz Tutorial




To do this tutorial you will need  
 Toxic Desirez Scrapkit Synful Treatz
Which you an buy HERE
I have also used one of Toxic Desirez Templates 315 which you can download from HERE
The tube im using is Martin Abel tube you can buy that HERE
You will also need eye candy gradient glow you can download this from the net

Open the template on the back two rectangles
 flood fill a colour of your choice from the tube click on both convert by 4
then delete on both add noise of choice to both
Go to the kit and choose a paper of choice paste behind two new frames just created
click inside each expand by 2 invert and on the paper layer click delete
add a drop shadow of choice to the frames and merge the frame
 and the paper layer together
Do this on the back three layers of the template
moving none of them out of the place they were originally
On the next layer do the same as before make this a frame
only instead of choosing a paper of choice open your tube of choice
and place behind frame that has just been created now click inside frame expand by 2
and invert and on the tube layer click delete
On the tube layer effects textures blinds
10.60 light from left /top ticked and boxes should both be black apply
add drop shadow of  choice to your frame and merge these two layers together
Now open the large blue ribbon from the kit and place to the left hand side of the tag
Now on the circle layers from the template we are going to do the same
 as we have done on all layers make these both frames
Open your tube of choice
and again position it behind the frame click inside the frame expand by 2
invert and on the tube layer click delete duplicate the tube layer
gaussian blur by 10 on the bottom layer
 on the top layer change the opacity to screen now merge these two tube layers together
effect texture weave 1.3.1 fill gaps ticked both boxes
chooses a colour from your tube for both apply
now add a drop shadow on the circle frame
and merge these two layers together
Open the devils spear freom the kit rotate this a little to the left
 and place on the left hand side tof the tag
Open the demon and add a drop shadow of choice and place bottom left of the tag
Copy and paste the chain from the kit into the bottom right of the tag
adding rop shadow of choice
Now again caopy and paste a paper from the kit click on the long rectangle
going all the way across the tag click on that invert and delete on the paper layer
merge these two layers together add a drop shadow of choice
Do the same on the next two layers from the template
on both the long left and right panels
Open the eye ball from the scrapkit and add a drop shadow of choice
 and place bottom right of the tag over the chain layer placed before
Open the red devil and make him small enough to be placed
on the long bar that goes all the way across the tag adding a drop shadow of choice to him
Open the sparkles and place to the bottom of the tag duplicate and flip
 and merge these two layers together
Open the Doodle from the copy and paste makeing sure the hightest point is ito the center
of the tag duplicate and mirror merge together
Open the splatter  make small enough to fit into the top left corner of the tag
duplicate and place this one center left now merge these two layers together
 duplicate and mirror now merge the doodle layer and the splatter layers together
and place this layer at the bottom of the tag as this is your background
Open the long fire layer now choose a couple of the rectangle layers merged earlier
and place along the top of these if any parts hanges over the frame
using your eraser tool
erase them then when happy merge the fire layer on
which ever frame layer it has been placed
I chose to place it on three of the back rectangle layers
Now delete the large circle glitter layer from the template
click inside large circle layer expand by 4 new raster layer flood fill this white
or a colour of your choice
 contract by 4 delete now you should be left with just a frame a noise of choice
 go back to original circle and paste your tube enlarge so it fills the total circle
click inside circle invert and on the tube layer click delete
Duplicate the tube layer gaussian blur by 10 on the bottom layer on the top layer
 change the opacity to hard light now merge these two layers together
add sereral drop shadow of choice to the large circle frame maybe 4 times
 them merge the frame and tube layer together
Hide the glitter star layer from the template
 copy and paste a paper from the kit
now on the star layers click every star invert and delete on the paper layer
add noise of choice to these unhid the glitter star layer
merge these two layers together and add a drop shadow of choice
Now open the butterfly add a drop shadow of choice and place on the large circle layer
Open the wing add a drop shadow make small rotate this to the right
and place in the very top right of the tag
Open one of the bows from the kit add a drop shadow of choice
and place on one of the back layers that were merged before
 making sure that its just infrount of the frame layer that is chosen
Paste tube of choice to the left of the tag adding a drop shadow of choice
 4 times to give it a real feel of defination
Add your copyright and your name of choice adding a gradient glow
and a drop shadow of choice
All done

Red Queen Tutorial




To do this tutorial you will need  
 Toxic Desirez Scrapkit Red Queen
Which you an buy HERE
The tube im using is Martin Abel tube you can buy that HERE
You will also need eye candy gradient glow you can download this from the net

Open a new 650 x650
Open the splatter from the scrapkit
and make small enough to fit into a corner of the tag
 then duplicate and flip merge together duplicate and mirror
 now merge these two layers together
Open the swirls and turn horizontal place top left of the tag
 duplicate and mirror place center right of the tag merge these two layers together
now duplicate and flip now merge these two layers together
Now open the heart frame and get your tube of choice fill the frame
click inside the frame expand by 2 invert and on the tube layer click delete
 if your tube doesnt fit totally duplicate
the tube layer and place in the heart frame so its filled
now add a drop shadow of choice
to your heart frame
Effects texture weave 1.3.1 gaps filled ticked with colour from your tube
 in both boxes apply now mege these two layers together
 add a drop shadow of choice Duplicate this layer
place one bottom left and the other one top right
Open the castle add a drop shadow of choice make small enough
 to be placed in a corner
 of the tag now place top left of the tag
Open the sparkles place top of tag duplicte and place this on bottom
 of the tag merge these two together
Open the lips and the red cat from the scrapkit make the cat smaller
 adding a drop shadow of choice now place him on top of the lips
 merge these two layers together place
bottom left of the tag
Now move the heart frame placed today bring this layer forward
to go after the cat layer
Now open a paper of choice open the large circle frame click inside frame
expand by 4 invert and then delete on the paper layer
now duplicate the large circle layer get your tube of choice
and place between the two circle layers now with your eraser tool
 rub out the top frame as it goes over the tube
that you have just placed
If any of the tube is hanging below the botttom large circle layer
then eraser the tube parts that do
Now add a drop shadow of choice on the tube layer
 add a drop shadow of choice to the bottom large circle frame
Now merge the paper layer the tube layer and the 2 frame layers
Place this center right of the tag
Open the skulls make small enough to cover the circle just placed
 add a drop shadow of choice and place around the bottom off the circle just placed
Get the telephone add a drop shadow of choice
make smaller to fit in the bottom left corner of the tag adding a drop shadow of choice
Open the teapot and do the same as you did with the telephone
only place on the right side of the tag
Open the spider and place on the web of the skull and flowers placed before
Open up the bunny make the same size as the teapot and the telephone
and place it behind the teapot adding a drop shadow of choice
Get the mushroom layer and place over the red lips layer

Paste tube of choice adding a drop shadow of choice
Add your copyright and your name of choice adding a gradient glow
and a drop shadow of choice
All done

Alices Dream Tutorial


To do this tutorial you will need  
 Toxic Desirez Scrapkit Evol Ayce
Which you an buy HERE
The tube i am using is Martin Abel you can buy that HERE
The template is Toxic Desirez 326 you can download it HERE
You will also need eye candy gradient glow you can download this from the net

Now open the template remove the copy right
Open the splatter from the scrapkit and make small enough to fit into the top right corner of the tag now place it there duplicate and flip merge together
these two layers then dupliate and mirror now merge these two together you now have your background for your tag
Now click on the back two large rectangles from the template
 modify contract by 4 then delete this will create two frames
if you wish you an colourize to suite your tube
 Now once coloured add a noise of choice add a drop shadow of choice
Now open a paper from the kit and place behind one of the rectangle frames
click inside the frame expand by 6 invert and on the paper layer click delete
 now do the same with the other rectangle frame once you are done
place the two papers behind the frame and merge the four of the layers together
Go on to the two circles from the template
 and do the same as you did for the two retangles
make them into frames with noise of choice  and drop shadow
 then choose again a paper from the kit i used the same paper on both these circles
 you dont have to now one done merge these four layers together
On the two side retangles from the template do the same actions
as you did for thecircle and the large retangle layers
 i also used the same paper from the scrapkit for both of these
One done you should now have 4 layers the background
we created the large retangle the circles and the side rectangles
they should all be frames with papers inside
Now on the two diagonal retangles i used the background from the elements folder
 i did the same as all the rest made this into a frame
 and added the paper then merge together these four layers
On the small diagonal squares get your tube of choice and place it over the square
 so it fill it totally click on the square invert
and then on the tube layer click delete
 now delete the original square layer as this is no longer needed
 duplicate the tube layer gaussian blur of ten on the bottom layer
on the top layer change the opacity to screen
now merge these two layers together
Effects texture weave both windows white gaps ticked and 1.3.1 apply
 do this to both squares then merge these two layers together
On the next two layers the oval shapes do the same as all the rest
 make the shape a frame add noise and drop shadow
only this time do the same as the small squares
use your tube of choice to fill them one satified
 before you merge these together dupliate your tube
on the bottom layer gaussian blur 10
on the top layer change the opaity to luminace legacy
now merge the three layers together
do this for both ovals then merge them together
Now open one of the cards from the kit and make smaller
 place one in top right of the tag
infront of your circle layer make sure hes peering over the top
 of the rectangle layers infront of him
Now open the poppy and place in same place as the card you have just placed
but more to the right adding a drop shadow of choice to it
Now open the other card layer from the kit and place him
 in the same place as other on but in the left of the tag
Open the sparkles place in top of the tag duplicate place in bottom of the tag
 merge these two layers together
Now on the large enter cirle get your tube again if it comes with a large layer
use that if not you will have to enlarge your tube up to fit the entire circle
this an be tricky with smaller tubes
Get it so the tube layer fits the circle click on the circle
invert and then delete on the tube layer
 Dupliate on the bottom layer gaussian blur of 10 on the top layer
change the opaity to screen merge these three layers together
now open the checkered paper from the kit place over the circle
 click circle again invert and delete on the paper layer
change the opacity to overlay and change the opacity to 60 percent
 now merge this with the circle
Open the kit and get the wire circle frame and place this over the top of the circle
adding a drop shadow of choice one happy merge together
move the circle slightly to the left and higher than the enter
Now open the grass from the kit and place along bottom of the tag
Place the cards from the scrapkit down the left side of the tag
make smaller so they only fit from the top to just below the center of the tag
adding a drop shadow of choice
Get the butterfly and place in top left corner on one of the frame edges
Now open the chair from the kit and place to the right of the design
Get the cup and books from the kit and place these to the bottom right of the chair leg
adding a drop shadow of choice to each
Open the pocket watch and place this behind the other hair leg
adding a drop shadow of choice
 Now open your tube add a drop shadow of choice
 and position her as if she is sitting on the chair
Open the cheshire cat grin and place over the bottom right of the tag
 change his opacity to overlay
Now open the blue mushroom and the red mushroom and place bottom left of the design
Get the catipillar and place him between the two mushrooms just placed
 Make sure hes at the front of the tag adding a drop shadow of choice
Finally open the winged pawn add a drop shadow to it and plae top right
Add your copyright and your name of choice adding a gradient glow
and a drop shadow of choice
All done
 Thankyou

Dark World Tutorial




To do this tutorial you will need  
 Toxic Desirez Scrapkit Dark Forest which is an exclusive to Hania Store
Which you an buy HERE
The tube im using is Amberly Berendson Lilith tube you can buy that HERE
The template is Toxic Desirez 326 you can download it HERE
You will also need eye candy gradient glow you can download this from the net

Now open the template remove the copy right
Open the doodle from the kit and place in top right corner dupliate and flip
 merge together duplicate and miror then merge together this is your back ground
Now open a paper from the scrapkit from the kit copy and paste
place behind the back rectangles
on all of the frames created change the colour to suite your tube of choice
Click inside rectangles contract by 4 click delete deselect add noise of choice
Add drop shadow of choice twice
click inside rectangle expand by 2 invert and click delete on paper just placed
do this on both back rectangles
merge together the frame and paper layer
Open another paper from the scrapkit and do the same as above on the next 2 layers
of the template which are the two circles
Again copy another paper from the kit and do the same
on the next two rectangle layers
only dont merge together duplicate the paper layer on the bottom layer gaussian blur by 10
and on the top layer change the opacity to screen
now merge these three layers together
click the next two rectangles convert by 4 then delete select nothing add noise of choice
 add drop shadow of choice
 choose a paper from the kit and do as before click inside each rectangle and expand by 4
then invert and on the paper layer click delete
Now open your tube of choice and place within the rectangle again expand by 2
invert and on the tube layer hit delete dupliate this layer on the bottom layer
gaussian blur by 10 on the top layer change the opacity to screen
merge the paper layer and two tube layers together now effects texture weave 1-3-1
 both windows black gaps ticked apply
Now merge this layer and frame layer together
On the small squares choose a paper from the scrapkit copy and paste
click inside each square convert by 4 delete select nothing add noise of choice
add drop shadow of choice
Open your tube again and place were desired in square click expand by 2
 invert and on tube layer click delete
Place the tube layer behind the frame layer then merge the paper layer
and the tube layer and the frame layer
On the next 2 egg shape layers click egg layer convert by 4
then delete select nothing add noise of choice add drop shadow of choice
click inside egg layer expand by 2 new raster layer and colour this a colour
 from your tube effets texture weave again with same settings as before
Open your tube and place in egg shape were desired behind the frame click
inside frame expand by 2 invert and on the tube layer just placed click delete
Now merge paper layer frame layer and tube layer together
Now on the center circle layer paste tube using your select tool on circle select a section of your tube highlight invert then delete
duplicate this layer loads and move untill covers circle layer totally
 then merge the tube layers together
click inside circle convert by 4 delete select nothing add noise of choice
add drop shadow of choice
Open a paper from the kit copy and paste click inside circle expand by 2 invert
and on the paper layer click delete
Now merge the paper layer the tube layer and the frame layer together
add a drop shadow of choice
Open the flower vines place in top right corner duplicate and flip merge together
duplicate and mirror then merge together now place in front of back circles
Now open the bridge layer make smaller place bottom center right
adding a drop shadow of choice
Now open flower vines pale top right corner dupliate flip merge these two layers together
dupicate and mirror now merge these two layers together
Open the grass layer make small enough to over bottom half of the tag
dupliate and mirror merge together and place bottom of tag
just behind the bridge layer
Open the sparkles duplicate place one top enter place other bottom center
of the tag merge together and place behind the bridge
Paste the cross from the kit make smaller and rotate so it fits in top right corner
 place behind egg shape adding a drop shadow of choice
Open the dark roses place behind the cross just placed far right of the tag
Get one of the butterflys from the kit add a drop shadow of choice place corner of the bridge
Open the vines from the kit rotate horizontal make small so it covers half the tag place bottom infront of the grass layer duplicate and mirror merge these two layers together
Now go threw the layers and merge all double layers from the template that are the same
apart from the egg same layers
Paste tube of choice adding a drop shadow of choice
Add your copyright and your name of choice adding a gradient glow
and a drop shadow of choice
All done
 Thankyou

Cynder Tutorial


To do this tutorial you will need  
 Toxic Desirez New Scrapkit Cynder
which you can buy from HERE
The tube im using is Martin Abel you can buy that HERE
You will also need eye candy gradient glow you can download this from the net

Now open a new 650 x 650 layer
Go into the scrapkit and copy and paste the curly tree layer
make it small enough to fit into one of the corners of the tag place it in the top right corner
dupliate and flip now match up the tree trunks with your eraser brush erase the extra that over laps now merge these two layers together
duplicate this layer and mirror then merge together
Open tghe yellow star layer from the kit
 and add a drop shadow of choice place one top right of the tag
and one bottom left merge these two klayers together
Now open the circle frame from the scrapkit
 and place enter of the tag open a paper of choice from the scrapkit
and copy and paste behind the circle frame
now click inside frame expand by 3 then invert and on the paper layer click delete
Now open your tube of choice if it does not come with an enlarged layer then you will have to enlarge your self untill it fits the circle frame
 when happy with possition click again inside the circle frame
 expand by 3 invert and delete on the enlarged tube layer
now duplicate this layer and on the bottom layer gaussian blur of 10
 on the top layer change the opacity to screen merge these two layers together
then effets texture effects weave
1-3-1 a colour from your tube
 and fill gaps ticked and apply
add a drop shadow of choice to the circle frame and merge the paper layer
the tube layer and circle frame layer together
Now make slightly smaller and place just above center fight
Now open the film strip from the scrapkit and rotate untill it is vertial
 get your tube of choice again
and dupliate four times  place each tube layer behind the film strip
and in the windows of the film strip change position of the tube
when happy click inside the window expand by 3
 invert and on the tube layer click delete do this to all four tubes
so you end up with a part of the tube in all four film strip windows
 now merge all the tube layers togther
duplicate and on the bottom layer gaussian blur by 10
 on on the top layer change the opacity to dodge then merge these two layers together
 now do the same as before effects texture weave but this time
change this to a different colour from the tube 1-3-1 gaps filled ticked apply
Now add a drop shadow of choice to the frame and merge these two layers together
Now open the string layer from the kit
and rotate untill it is vertiale and plae over the top of the film strip now with your eraser
 erase some of the string from the middle to the edge of the film strip
 so it now looks like the string is wrapped around the film strip
Now open the raven and make smaller add a drop shadow of choice
and place him on the sring just placed around the film strip
so it is as if he is perched upon this
 now merge the raven and the string with the film strip
and place to the far right of the tag
Now open the little devil from the kit add a drop shadow of choice
 and place him on the film strip higher from the raven
as if they are looking at eah other when happy merge these two layers together
Open the eye and snake add a drop shadow of choice place this at the bottom
 of the film strip and to the left when happy merge that too with the film strip
Open the pink jewel and place behind the film strip
and the large circle frame to the right just below the large circle frame
Open the lolli and make smaller and tilt slighly to the right
adding a drop shadow of choice place top right behind the frame and circle layer
Now open the small square frame layer choose a paper from the kit
copy and paste behind the frames just plaes click inside frame
 expand by 3 invert and on the paper layer clik delete
 Now open tube and do the same as before place behind the square layer
 change possition of the tube click inside the square
expand by 3 and on the tube layer click delete
do this for both tubes now merge the paper and tube layers together
and hue and saturate colourize them
doesnt matter what colour is chosen it the saturation should be 0
 now apply adding a drop shadow of choice to the frames
 merge the tube and frame layers together
adding another drop shadow again to the frame layer
Now we need to separate these two frames so dupliate and hide one layer
and with your eraser brush erase one of the squares then unhide
 the other square layer and erase the opposite square to the one you just erased
so that you have two squares that are different
Place to the left of the tag one above the other
Open the tower from the kit and place behind the two frames just placed
Copy and paste the lightning behind the film strip but infront of the large circle have  it coming right across the large circle
Open the web dupliate and flip so that they both join up merge these two layers together
place bottom center of the tag so that it starts from the bottom square box placed before infront of the large cirle but behind the film strip
also copy and paste the spider on to the web adding a drop shadow of choice to it
Also open the loud and plae behind the web but place this behind the large irle layer and film strip
place the cat add a drop shadow of choice and place bottom left of the tag
Open your tube of choice add a drop shadow of choice and plae were desired
Add your copyright and your name of choice adding a gradient glow
and a drop shadow of choice
All done
 Thankyou

Madness Tutorial



To do this tutorial you will need  
 Toxic Desirez Scrapkit Madness
which you can buy from HERE
The tube im using is Martin Abel you can buy that HERE
You will also need Millies Template 765 you an get that from her blog HERE
You will also need eye candy gradient glow you can download this from the net

Now open a new 650 x 650 layer
Open the numbers from the scrapkit and place on tag
so that this covers all the background
Open the template and copy and paste each into the 650x650 layer just created
leave out the wordart
plae the large oval center top two similar rectangles at both sides
and large rectangle in the center of the tag copy and paste the glitter background
with each of them now close the template
click on each glitter background contrat by 7 then delete now bring the three glitter frames to the front of each rectangle
On the back oval click inside the oval contract by 7 and delete adding a noise of choice
Now open a paper of choice from the scrapkit plae behind the oval click
 inside oval expand by 2 invert and on the paper layer click delete
Add a drop shadow of choice to the glittter oval frame and merge
 with the oval paper just created add a drop shadow of choice and send to the back
of the tag infront of the numbers placed before
Open up a scene from the scrapkit the toadstools first the creepy forest
 second and the steps and door third place in this order in each frame
doing the same as the oval place
behind glitter frame click inside glitter frame expand by two
 invert and on the scene layers click delete add a drop shadow of choice
 to the glitter frame then merge the frame and scene layer together do this for all 3 frames
Placethe  playing cards and add a drop shadow of choice
place around to the right of the tag behind the large oval shape placed before
Open the evil tree and place in center of the tag
 as if its coming out of the creepy forest adding a drop shadow of choice
Open the mushrooms and place these to the left as if there coming out of the toadstool rectangle adding a drop shadow of choice
 Also open the eyes and place center of the right rectangle
merge the three rectangles together along with the creepy tree the eyes and the mushrooms
Open the grass and flip make smaller place to the right
 duplicate and place to the left merge these two layers together and place bottom
 of the tag behind the three rectangle layer
Open up the swirl and plae over all layers hange the opacity to overlay
Open the hat place to the left bottom of the tag rotate
to an angle adding a drop shadow of choice
Do the same with the cup layer but place that to the right
Get your tube of choice adding a drop shadow of choice place to the left
Open the bottle place infront of the tube adding a drop shadow of choice
Place the lock in the bottom right adding a drop shadow of choice
Open the sparkles place on tag duplicate and the mirror then merge together place this layer just infront of the large oval layer
Open the swirl add noise of choice place one top left of the tag
just behind the large oval shape duplicate and place bottom right same level as other one just placed merge these two layers together
Open the spider add a drop shadow of choice and place ontop of the clock
Use the lights along the bottom adding a drop shadow of choice
Open the spoobn rotate to an angle add a drop shadow of choice place top left of the tag
All done if you wish to add anymore from the scrapkit thats up to you
Add your copyright and your name of choice adding a gradient glow
and a drop shadow of choice
All done
 Thankyou

Skullerella Tutorial



To do this tutorial you will need Toxic Desirez Scrapkit Skullerella
which you can buy from HERE
I am using Enys Guerreo work this is a special tube that was issued oct 2014 but you can get other tubes from the artist HERE
You will also need Millie new template 763 you can down load that HERE
You will also need eye candy gradient glow you can download this from the net

Now open a new 650 x 650 layer
Now go into the scrapkit and choose the splatter
place in top right of the tag duplicate and place on bottom left of the tag
 merge together
Now open the cog and place left top and duplicate and place bottom right
 merge these with the splatter layer
then make this smaller so it fits into a corner then duplicate and place bottom
right then duplicate and place bottom left of the tag duplicate
and place top left so its in all all four corner then merge all four layers together
Now open the template and copy the large circle to the tag get your tube
and enlarge it so it totally fits the circle click inside circle contract
by 5 click delete
Click inside of the circle expand by 3 then on the tube layer click delete
Now on the cirle frame add noise of choice
add a drop shadow of choice
On the tube layer duplicate and gaussian blur by 10 on the top layer
 change the opacity to screen then effects tewture effects weave 1...5...1
all white and gaps filled ticked apply
merge these three layers together
Now copy the next circle layer paste youe tube and with your selection tool
on circle choose a selection of your tube invert and then
delete duplicate this a few times overlap
them untill you can cover all of the circle layer just place
now merge them together place behind the circle and do the same
as before click circle contract by 5 then delete then click the circle again expand by 2
 invert and on the tube layer click delete
on the circle layer add noise of choice and a drop shadow of choice
 and then merge these two layers together
Now copy the large rectangle paste on tag open a paper of choice and paste and click on rectangle invert and on the paper layer click delete
Now open your tube and paste on tag click rectangle again invert then on the tube layer click delete now change the opacity to overlay
Now merge these three layers together adding a drop shadow of choice
place the largest circle in top left of the tag the smaller circle bottom right
place the rectangle in top right Open the dots from the scrapkit and
add around rectangle changing them to a colour of choice
Paste the small black layer click inside contract by 5 the delete now paste your tube
 again behind the frame just made
click inside same square expand by 3 invert then on tube layer click delete
Add noise of choice to black frame add a drop shadow
On the tube layer
Effects photo effects black and white film 0...0...apply then merge
 these two layers together
add a drop shadow of choice place top left duplicate and mirror place this one
center left just down from one placed before
Open the tilted bow add a drop shadow of choice and place top left of the tag in the rectangle
Open the gravestone rotae to an angle adding a drop shadow of choice
on the bottom left of the tag
Open the cherry branch rotate so its vertical and place bottom of the tag
Open the dragon add a drop shadow of choice and place this between
 the two colourless frames top left
Open the moon element and place top right behind the rectangle layer
Paste the roses and skulls layer at the bottom right of the tag
Now open your tube of choice adding a drop shadow of choice place the tube
behind the roses & skulls layer just placed
open the raven and place on branch on the bottom adding a drop shadow of choice
Open the sparkles make smaller and place over the roses & skulls
and paste another sparkle layer and place in front of rectangle layer
Add your copyright and your name of choice adding a gradient glow
and a drop shadow of choice
All done
 Thankyou

Wastelands Tutorial




To do this tutorial you will need  
 Toxic Desirez Scrapkit Zombie Wasteland
which you can buy from HERE
The tube im using comes within the scrapkit
You will also need eye candy gradient glow you can download this from the net

Now open a new 650 x 650 layer
Now go into the scrapkit and choose the splatter
make small enough for a corner of the tag
place top right corner duplicate and mirror merge these two layers together
then duplicate this layer and flip and merge these two layers together
 you now have the base for the tag
Open the blue ribbon and place along top left of the tag duplictae
and place bottom right of the tag merge these two layers together
Open Up the large circle from within the scrapkit and place in center of the tag
 take your tube of choice choose a section
with your selection tool on circle choose your section invert then delete
you now should have a round section of your tube duplicate
this loads of times and layer them until the whole circle is filled then merge
 these layers together
Click inside the circle expand by 3 then invert and on your tube layer click delete
 now duplicate this layer gaussian blur of ten
and on the top layer change the opacity to screen
 then merge these two layers together now on the circle layer
add a drop shadow of choice twice on the tube layer textures weave 2..5...2..
 both white fill gaps ticked
merge the circle layer and the tube layer together
Open the hand print layer make smaller and place anywere on the circle layer
Open the tabe and place at a corner angle on the circle and exsess use your eraser brush
 and remove now when happy
 duplicate and mirror then move down slightly and exsess again
remove add a drop shadow of choice then merge together
Open the toxic symbol place in top left duplicate
 and place one in bottom right
of the tag merge these two layers together
Open one of the signs add a drop shadow and place to the right of the tag open
 the badge within the scrapkit and place center right behind the large circle
Open the goggles and place bottom right of the tag
Now open the sparkles and place anywhere on the tag
Open the tube from the kit and place were desired duplicate and unlayer
Open a paper layer from the kit paste layer
Open the star frame place click inside expand by 3 invert and on the paper layer click delete
do the same on the tube layer add a drop shadow of choice to the star frame
 and merge these three layers together duplicate twice and unlayer
Now unlayer the previous tube and hue and saturate without a colour
  then merge these three layers together
adding a drop shadow of choice place to the left of the tag
Open some of the flowers from the scrapkit adding a drop shadow of choice
 and place bottom left of the tag behind the tube and circle layer
when happy merge them together
duplicate mirror and flip so there in the top right of the tag send to back of the tag
Add any thing else you wish from the scrapkit
Unlayer the two star layers that were hidden
before make smaller and mirror place were desired
Add your copyright and your name of choice adding a gradient glow
and a drop shadow of choice
All done
 Thankyou

Kaboom Tutorial



To do this tutorial you will need  
 Toxic Desirez Scrapkit Kaboom
which you can buy from HERE
And a tube of choice i chose Beautiful Blonde tube by Arthur Crowe Which you can buy HERE
You will also need eye candy gradient glow you can download this from the net
You will also need penta.com filter this can also be found on the internet

Now open a new 650 x 650 layer
Now go into the scrapkit and choose a paper copy and paste as a new layer Now open the circle words place over the top click inside the circle expand by 3 then invert and delete
on the paper layer Now open your tube of choice if it comes with a close up paste were desired do the same as the paper layer click inside the circle words expand by 3 then invert
and click delete
on the tube layer now duplicate on the bottom layer gaussian blur by 10 on the top layer
change the opacity to screen adding a eyecandy glow white with your settings
 ..i have mine set and the only thing i change is the size of the glow
 but i tend to use medium ..10..100 white add a glow to the circle words
then add a drop shadow of choice now merge these three layers together
 and place top center
Open up the splatter and make small enough to go into the top right of the tag
 then duplicate and place in bottom right of the tag
 then duplicat again and place center right now merge these three layers
 together duplicate and mirror then merge these two layers
 and place at the back of the tag
Now open the Film stip and rotate so it goes vertical open another paper of choice
place behind strip on the strip click inside every window expand by 3 then invert click on the paper layer then delete
Now open your tube of choice and do the same as the paper layer
place behind the the strip click inside all windows expand by 3 invert then on the tube layer click delete
i used the same tube duplicated and moved till i got what i wanted in the window
merge these three tube layers together then duplicate and on the bottom layer click gaussian blur 10 on the top layer change the opacity to lumance legacy now merge these two layers together
click penta.com and on the coloured dot using these settings
60...10...255..255..255  apply
add a drop shadow to the strip layer place that above all two layers the tube windows
and the paper windows now merge together place bottom right of the tag
Open the star from the scrapkit make smaller duplicate your large circle created before
make smaller place behind the star then click inside star expand by 3
click invert then delete on the small circle layer
 using same setting as before use penta.com
 coloured dot again add a drop shadow to the star then merge these two together and add a drop shadow of choice to the star place top left of the tag
Open the bear place on the bottom left of the tag adding a drop shadow of choice
Open the three flowers and place each one behind the bear when satified merge the three flower layers together
Open the butterfly add a drop shadow of choice and place on star
Open the ribbon make it the size of the tag place behind the flower layers
 the teddy layer and the film strip
Open the beading and place to the right of the film strip
Open the bomb and place behind the film strip in the corner
Open the two gold stars and place one bottom of the tag behind the flowers
and one center left behind the flowers placed earier merge these two layers together
Open your tube of choice and place were desired
adding a drop shadow of choice
Open the sparkles and place just in front of the large circle
Add your copyright and your name of choice adding a gradient glow
and a drop shadow of choice
All done
 Thankyou

For Honour




To do this tutorial you will need  
 Toxic Desirez Scrapkit Skullz & Stripez
which you can buy from HERE
And a tube of choice i chose Cute Babe by Arthur Crowe Which you can buy HERE
You will also need eye candy gradient glow you can download this from the net

Now open a new 650 x 650 layer
Go o the scrapkit and open the spaltter and make smaller and place in top right hand of tag duplicate and place in bottom left of the tag merge together and add a noise of you choice
Open the corner starts make small so fit into the bottom left of the tag dulpicate and mirror merge together duplicate and flip them merge together then dupicate this and place at top of the tag merge together
Now open square frame 4 from the scrapkit and rotae till its vertical
now open your tube of choice duplicate twice so theres three and place inside the frame just placed changing position each time
Now click inside the square and expand by 3 invert then on the tube layer placed click delete now do this for all three windows
merge thee three tube layers together and duplicate on the bottom layer gaussian blur 10 on the top layer change the opacity to screen merge these two layers together
shadow of choice to the frame them merge the tube and frame layer together
add a drop shadow of choice
 Now open the stream of stars and turn vertical and place down left hand side of frame duplicate and place down right side of the frame merge these three layers
together the two star layers and the frame layer
Open the fireworks make small enough to fit into one corner and place behind film strip placed before duplicate twice so there three layers all down the film strip on for each window merge these  layers together the freworks and the frame
Open the large blue star place in top right corner duplicate and place bottom right corner
open star and place in center of them both merge these three layers together
Open the hat from within the scarpkit and place bottom right adding a drop shadow of choice to it
Now open the large flag and make small enough to be placed on top of tag change the opacity to overlay
Open one of the hows from the scrapkit make smaller add a drop shadow of choice place two of them and were on the frame layer them merge with frame layer
Open the sparkles from the scrapkit and duplicate one on the top of the tag and one on the bottom merge these two layers together
Open the butterfly from the scrapkit adding a drop shadow of choice and then mirror and place in top middle right of the tag coming off one of the stars
Open up the circle frmae and place between the square frame and the three stars placed before
Open your tube of choice and adding a drop shadow of choice place were desired
Add your copyright and your name of choice adding a gradient glow
and a drop shadow of choice
All done
 Thankyou

Spirits



To do this tutorial you will need  
 Toxic Desirez Scrapkit DiaDeLos Muertos 2
which you can buy from HERE
And a tube of choice i chose Martin Abel Which you can buy HERE
You will also need millie template 759 you can download it  HERE
You will also need eye candy gradient glow you can download this from the net

Now open a new 650 x 650 layer
Open up the splatter from the scrapkit place in top left of the tag duplicate place this one in the bottom right of the tag merge together
Open the butterfly from the scrapkit place in top right of the tag duplicate and mirror now merge these two layers together dulpilcate and flip so that theres a butterfly in every corner now merge these two layers together
Open up the template and copy the circle the small square and the large retangle on to you tag
Place the circle top left the smalle square top right and the rectagle in the center
Now go into the scrapkit and open a paper of choice place over circle
 click within circle invert and then delete on the paper layer do the same for the small square and the rectangle
Now open your tube of choice place within the circle are until happy and do the same as before click inside circle layer invert and then on the tube layer delete do this with all three again small square ,rectangle and circle
Now go back to the circle layer and on the tube layer
 just created duplicate on the botton layer gaussian blur to ten on the top layer change the opacity to screen do this for all three again
Now go back to the circle hue and saturate a colour of choice click within the circle
contract by 5 then delete add noise of choice bring to the top layer above circled tube layer add a drop shadow of choice to it then merge all circle layers together ...
Do the same for the small square layer and the rectangle layer
Now move the recangle layer to behind the small sqaure and circle layer
 and slightly to the top right duplicate this layer and place other one
 to the lower left of the tag
On the top rectangle effects texture weave 1.5.1 with gaps ticked using a colour from the tube apply
do the same for the lower rectangle only choose a differnt colour and apply
Open up the fire element from the scrapkit make smaller duplicate and merge together adding a drop shadow of choice
now place along bottom of the lower retangle layer so you might need to resize this duplicate and do the same on the higher rectangle add a drop shadow
 of choice and merge with each rectangle
Open the film strip place at bottom of the tag open paper of choice from the scrapkit click in every window expand by 3 invert then on the paper layer click deltet now open tube of choice and do the same place in first window in the film strip click inside window expand by 3 invert then on tube layer click delete do that in all of the windows of the film strip
 changing the position of the tube in each window when all four are done
 merge them together change the opacity to luminace legacy add a drop shadow of choice to the frame and merge the paper the tube layer and the frame layer together then add a drop shadow of choice again
Open the white long rectangle payer
ajust brightness to a light grey the hue and saturate it a colour from your tube of choice
then add a noise of your choice add a drop shadow place this in the top right side of the tag duplicate and place bottom left side of the tag merge together and place infront of the butterfly layer
 placed before
Open the sparkles from the scrapkit place top of tag duplicate and place bottom of tag merge together
Open up one of the bows from the scrakpkit and add a drop shadow of choice and place bottom of the circle layer
Open the Roses and orange flowers from the scarpkit and place were desired behind the frames placed before when happy merge together
Open the man and woman from the scrapkit and add a drop shadow of choice and place were desired
Open your tube of choice and add a drop shadow of choice
Add your copyright and your name of choice adding a gradient glow
and a drop shadow of choice
All done
 Thankyou

Funhouse





To do this tutorial you will need  
 Toxic Desirez Scrapkit Dark Carnie 
which you can buy from HERE
And a tube of choice i chose Martin Abel Which you can buy HERE
You will also need eye candy gradient glow you can download this from the net

Now open a new 650 x 650 layer
Open up the splatter from the scrapkit place in top left of the tag duplicate place this one in the bottom right of the tag merge together
Open the ticket layer place in center of the tag
Now open the moon layer make smaller and place top left of the tag duplicate and placebottom right of the tag merge together
Open the star fram duplicate twice so there is 3 of them place one top right one in the center and one bottom lefft Now open 3 papers of choice from the scrapkit place behind the three stars
 one the top right click insdie the star expand by 3 now click paper layer
 and click delete do this with the other two stars
Now open tube of choice and do the same as the paper layer but when placing your tube move it so that between the three stars that theres different parts
of the tube in each
Now duplicate the three layers on each star on all three gaussian blur by 10
on the main star tube layer change the opacity to screen now add a drop shadow of choice
on each star layer so you have a paper layer a blurred tube layer a screen tube layer
 and finally the main star layer itself on all three stars
Now on each star merge each layer together so that your left with three filled star layers
Now open the ribbon make slightly smaller and place along bottom of the tag place
 behind moon and star layers
Open the balloon layers place one behind the star at the top and one behind
the one on the bottom left star merge these two balloon layers together
 Open the clown layer mirror and add drop shadow of choice and place as though hes
standing on the bottom left star
Open your tube of choice add a drop shadow of choice and place on left side of the tag
Now open several circus layers and make a little circus to the bottom left
of the tag adding a drop shadow of choice so it gives the circus depth
Open the fire layer make smaller and hue and saturate to green to make the grass place along cirus tent duplicate and mirror
when satified were placed merge grass together merge whole circus layers together
Open up the funhouse element using your eraser rub out the face
 and using the wording place above the center of the tag using eye candy using gradient glow with setting of choice mine as 10 and thin and white
Open the card element place center right of the tag duplicate and make this layer smaller
but place in same place merge together and
place behind tube placed earlier
Open the cat layer make smaller add a drop shadow of choice place on left corner of the tag
Add your copyright and your name of choice adding a gradient glow
and a drop shadow of choice
All done
 Thankyou

Zombieland





To do this tutorial you will need  
 Toxic Desirez Scrapkit Alyce In Zombieland which is Exclusive to Hanias Store 
which you can buy from HERE
And a tube of choice i chose Martin Abel Which you can buy HERE
I used one of millie psp templates 757 you can download it HERE
You will also need eye candy gradient glow you can download this from the net

Now to start open the template and remove the @
Go into the scrapkit and copy and paste the spatter change the size for it to fi into the top right corner of the tag duplicate and mirror then duplicate and flip then duplicate and mirror you should now have a spatter in every corner of the tag now merge together
his layer on the bottom gaussian blur 10 on the top layer change opacity to screen then merge together
Now to into the paper section of the scrapkit and choose a paper copy into your tempate over the top of one of the squares click within the square and on the paper layer hit delete
 then merge these two layers together now do the same for the other square within the template now the square to the left
of the tag rotate untill its at an angle with the top left corner of the tag
Open up your tube of choice i chose martin abel alice  place over oval layer now with your selections tool set on cicle select a part of your tube you wish to use then invert and on the tube layer hit delete now you should have a part of your tube now duplicate this layer
several times untill you have totally covered the oval now hide the oval layer and on all the tube layers click merge unhide the oval layer and click inside the oval layer invert
 and on the tube layer click deleate now duplicate this layer gaussian blur 10
on the lower tube layer and on the top tube layer change opacity to luminace Legacy now merge these three layers together move this layer to the center left of the tag
Now open your tube layer again and place in circle layer i have enlarged the tube to fit the entire circle click circle layer invert  then on the tube layer click delete duplicate on the bottom ltube layer gausian blur 10 agian on the top layer change the opacity to screen now merge these three layers together
Texture weave 1.5.1.fill gaps ticked change the colour to what ever you would like to suit your tube i did mine white
Now go into the the scrapkit and copy the frame 1 over the top of the circle adding a drop shadow of choice you might have to resize this now merge this layer with the circle layer just filled
now move this layer closer top the right top of the tag
Open the card layer make smaller and place in top right of the tag behind the circle layer just placed
Now open the cat within the scrapkit and place bottom right adding a drop shadow of choice
Opn the cheshire cat smaile and rotate so that its at an angle in the top left
of the tag open the spider layer from the scrpkit and place this coming from the chesire cat grin that has just been placed
Open the set of cups place bottom left of the tag adding a drop shadow of choice send the spider layer above the cups so it looks like its sitting on them
Now open the film srip and place in center of the tag
 Open a paper from the kit and paste now click every window of the film strip expand by 3 invert and on the paper layer click delete
Open up your tube of choice place were desired in window of the film strip duplicate your tube and place in every window change section every time now click in film strip window and do the same as for the paper expand by 3 invert and on the tube layer click delete do that to all 4
merge the tube layers together duplicate on the bottom layer gaussian blur again
on the top layer change the opacity to dodge merge these two layers together add a drop shadow of choice
to the film strip now the paper layer the tube layer and the film strip
merge these three layers together
Place the layer tothe bottom of the tag and send it to just infront of the circle layer
Open up the swirlie make it smaller and place a few behind the circle layer when happy were placed merge layers together add a drop shadow of choice
Change the cat from the bottom right to on top of the film strip to the left
Open up your tube adding a drop shadow of choice and place were desired Remove the writing and the last 2 layers of the template
Open up the sparkles and place to the top duplicate and place to the bottom of the tag merge these two layers together and move layer to behind the film strip layer
Now open the pile of bones and pmake smaller and place to the bottom left of the tag behind the cup layer adding a drop shadow of choice Open the grabbing hand and make smaller placing this behing the pile of bones and making it look like its grabbing her ankle
Open the set of cake layer and place bottom fright of the tag adding a drop shadow of choice
Open the hat make smaller rotae it so it goes to an angle and place behind the set of cakes just placed 
Now add your copy right and name  i always use eyecandy gradient glow 
then add adrop shadow of choice to your name
and all done

Sugar Fae


To do this tutorial you will need  
 Toxic Desirez Scrapkit Sugar Fae with is Exclusive to Hanias Store 
which you can buy from HERE
And a tube of choice i chose Joel Adams Fairys Which you can buy HERE
I used one of millie psp templates 754 you can download it HERE
You will also need eye candy gradient glow you can download this from the net

Now to start open the template and remove the @
Next go to the scrapkit and choose a paper of choice copy and paste this to the template on the two littlest squares click inside them invert and then on the paper layer click delete merge each paper and square layer together
Now open another layer from within the kit and do the same for the larger square layer merge these two layers together
Now open the scene element and make smaller click on the largest rectangle layer in the template and do the same as before merge these two layers togther
Go to the scrapkit and open the swirl layer make smaller and then rotate so that this is horizontal place in top right of the tag now duplicate adn mirror place this layer bottom left of the tag
duplicate this layer and place this below the top right layer but to the left of the tag
now duplicate this layer and place above the bottom left element placed putting this one to the right bnow merge these four layers together
Now the squares that were coloured beffore place one small square to the top left to cover where the swirl starts place the other to the bottom right to cover the bottom swirl
place the larger square over the bottom small square just placed then finally place the large retangle with the scene on to the top right so there is a stepping stone effect adding a drop shadow of choice
 top all squares
Open tube of choice and make plarge to theat it will fill one of the circles from within the template now chlick inside circle invert then on tube layer click delete duplicate this layer on the bottom gaussian blur 10 on the top layer change opacity to screen then merge together
now effects texture effect weave with these settings 1,5,1 with fill gaps
 ticked choose a colour of your own choice same for both boxes i chose blak appy add a drop shadow of choice duplicate and mirror placing this circle over the other and merge them two together so you now have 2 circle layers place one top right just behing the lmiddle square placed and the other bottom left just behind middle square placed before
Now on the circle dots change brightness to black place these two layers around the circles but sending to the back of the tag infront of the swirl layers
Open your tube of choice again place within the long rectagle strip i changed the colour of the strip to black  click inside strip invert then on tube layer click delete duplicate the tube layer gaussian blur again by 10 this time on the yop layer change opacity to overlay 
then merge together and add drop shadow of choice
Open up clouds within the scrapkit make smaller and place bottom right of the tag duplicate then duplicate again and mirror then duplicate mirrored cloud until 2 layers on both sides then merge together place back of the tag
Open up leaf one and place at an angle one bottom right duplicate then mirror then merge together and place just after cloud layer
Open up the ribbon layer and place center of the tag afer this layer just placed
Open up and flowers from within the kit and place were desired once happy merge this layer together place behind circle layers
Open up the cluster of ribbons and place on top layer in the large rectangle sene placed before
Open up the sparkles and place on top layer Openup tube of choice and place were desired adding a drop shadow of choice 
Now add your copy right and name  i always use eyecandy gradient glow 
then add adrop shadow of choice to your name
and all done
 Thankyou

Mystical




To do this tutorial you will need Marin Abel  tube 47-2  which you can buy from HERE
you will also need Toxic Desirez Scrapkit Magical with is Exclusive to Hanias Store 
which you can buy from HERE
I used mathe mask of weescotlass creations301 you can download it from HERE
You will also need eye candy gradient glow you can download this from the net


Now to start open a 650 x 650 raster layer
Choose a color from scrapkit i choice a colour from the magical book 
flood fill and then load mask of choice merge group together I chose weescotlass mask 302
Using your elipse tool and make a cirle Flood fill a colour of choice 
Click inside circle selection modify convert by 5 then click delete 
Open up sun element and make this fill the circle just created then click within the circle layer then on the sun layer click delete
Open tube of choice and place between sun and circle layer if it doesnt fill the circle enlarge it then duplicate on the bottom tube layer click blur 10 change the top tube layer opacity to screen 
On the circle layer add noise of choice and add a drop shadow of choice 
Now merge the sun layer the 2 tube layers and the circle layers 
together then add a drop shadow of choice
Place the circle to the right of your tag 
Open the sun element and place on the left hand side 
of the tag behind the circle 
just placed
Open the green treen and place to the left over the sun and circle layer 
add a drop shadow of choice
Duplicate this layer make smaller and place in the cnter of the tag 
Open the castle layer form the scrapkit make smaller and place between the two trees
 just placed adding a drop shadow of choice
Now open the rock and grass layer make smaller and place on the right hand side
 of the center of the tag between the circle layer 
placed before and the small tree layer placed in center duplicate and mirror
 then merge these two layers together change the brigtness to -53 
Open the waterfall layer make smaller and place one to the left behind the rocks just placed and pduplicate and place another to the right behind the rocks again merge the two waterfalls 
and the rock layers together adding a drop shadow of choice
Get the magical fence layer make smaller place one to the right duplicate and place
 on to the left then merge these two layers together
Open the grass layers place the same as the fence only to the bottom of the tag
 one on the left and one on the right 
merge these two layers together duplicate this layer and raise upward 
to make more grass merge these layers together
Open the magical sparkle burst make smaller place in bottom right of the tag 
Open the magical book layer and place this over the layer 
just placed you will have to judge the size as your making the sparkles come from the book
Open the sparkle layer and place over the tag 
Now place your tube to the left of the tag adding a dropshadow of choice
Open one of the butterfly andmake smaller add a drop shadow of choice 
and place top right of the tag on the circle layer  created earlier
Now add your copy right and name  i always use eyecandy gradient glow 
then add adrop shadow of choice to your name
and all done
 Thankyou

Places

http://creativemisfits.aforumfree.com/forum
http://www.the-creativechicks.com/forum
http://taggersgonemad.forumotion.com/

CT

Symphony


Social Media Marketing Tools

My Licences

MPT ~1248
PTE ~ 1242
CILM ~ 2384
AMI ~ AMITRMO
CDO ~ 1743
SATC ~ SATC613
K.Garvey ~ 1061
E.Chatzoudis ~ EAS10350
Toosh Toosh ~0208
The Hunter ~ APSS0146
B.Jensen ~ 1192
Michi Art
V. Many ~ VMT_Angel
P 4 D ~ PFD_Angels
P 4 D ~ PFD_Scoobysy
A.Crowe ~ 356
R.Zaric ~ 026
F.A.B ~ fab26
T.Tzanoukakis ~ TTZ301
S.Woolcott ~ SW145
Z.S.D.Nielsen ~ ZZT723
P.P.Project ~ TPP00113
D.LEE ~DL0095
D.Marco ~DM0017
D.Imaging ~ 1615
G.Rudisill ~ GR0079
G.Art ~ GA12008
M.Tubed Art ~ MTA-3504
R.Tallamy~ 2232
D.Orileys ~
Misfits ~ CM-299
Norella ~ DBN27696TM
I.Rac ~IRT 2260
U.Y.A ~ U.Y.A.0280
Artistic Dreams ~ ADI-01605
Alicia Mujica ~ LDS 822
J.Cano ~ Can0099
Beehive ~ BHS-147
Spazz ~ Spazz-75
Celiart ~ CL03IP
S@CO~ S@CO 064
TBPSP ~ TBP 0257
Queen Uriel ~ 0158
Zlata ~ Zlatam-Angel
M.Jelina ~ MJ 1833
Mishka ~Angel-0001m
DAH - 476 ~ Angel

Follow

Instagram

Instagram

Message






Avatars

Stores


















Archives

Categories